News
-
-
How to control the dispensing amount?
1. Size of SMT patch dispensing amountAccording to work experience, the diameter of glue point shall be half of the product spacing. This will ensure that there is enough glue to bond the components and avoid excessive glue. The amount of dispensing depends on the length of time. In practice, the dispensing time should be selected according to the production situation (room temperature, glue viscosity, etc.)....
-
-
What is the difference between dispensing red glue and printing red glue
The dispensing needs to be installed on the bai dispensing machine. The common dispensing machines for du are Yamaha, Samsung, Siemens, Fuji, Panasonic, Sanyo, etc. There are only three types of packaging, namely 20ml (Panasonic dispensing hose), 30ml (Fuji dispensing hose), 30ml (Sanyo dispensing hose). Sanyo hose is the most popular in the market....
-
-
Selection of dispensing needles
If you are using dispensing accessories for the first time or you have found that the accessories you are using are not suitable, please refer to our suggestions....
-
-
What principles should be followed for the selection of dispensing needle of dispensing machine?
What factors will affect the dispensing quality of the dispenser? There is no doubt that all the friends who have contacted the dispenser know that the dispensing quality of the dispenser is affected by a series of factors, such as the dispensing amount, dispensing pressure, needle size, the distance between the needle and the working surface, the viscosity of the glue, the glue temperature, the curing temperature curve, and the bubbles in the glue. It can be seen that the selection of the dispe...
-
-
Common defects in dispensing process and their solutions
Dispensing is widely used, ranging from aircraft and ships to clothes and toys. It can be said that as long as the glue reaches the place, dispensing process services are needed. It is necessary to understand the common defects and solutions in dispensing process, as follows:...
